Instructions / Assembly

STEP 4 – Flame Deflector (#5), Drip Pan (#6), Cooking Grate (#7), and Drip

Bucket (#8) Installation

Open the lid of the REC TEC TRAILBLAZER. Install the Flame Deflector (#5) over the Air Box

Assembly with the small notches of the flame deflector over the small tabs located at the inside

front and rear of the grill body.

Install Drip Pan (#6) with the short lip sitting on the left-side drip pan support and

the longer lip resting on the right-side lower support. Make sure to leave equal gapping between

Drip Pan and front and back chamber walls to ensure even heat distribution.

BE CAREFUL NOT TO DAMAGE THE TEMPERATURE SENSOR WHILE

INSTALLING THE DRIP PAN.

(TIP: many customers line their drip pan with aluminum foil for easier clean up. When lining drip

pan, keep foil inside drip pan edges and do not wrap around as this can restrict airflow.)

Install the Cooking Grate (#7) by resting it flat on the front and back ledges inside chamber. Be

careful to avoid the temperature sensor during placement.

Install the Drip Bucket (#8) by clipping the handle to the integrated hook on grease spout at right

of chamber and allow it to hang.

( " ( PQGRSD(/$T(7$T(1#O+'K%U$'D(;;=7

Questions?

Call our customer service at 1-706-922-0890

10am-8pm EST. Mon-Thurs;

10am-7pm EST Fri;

9am-3pm EST Sat.

LONE STAR CHEF PELLET GRILL