Instructions / Assembly

Press Power button I/O to turn grill on and press temp up and down buttons to desired temperature.

• Turning the grill ON activates the automatic startup mode and illuminates the digital readout.

• If your grill fails to light itself within 30 minutes of startup, the Smart Grill Technology™ processor

will turn the grill off and display Er 3 on the screen. See page 18 for ER Codes

• Pressing the power button again activates the shut down mode of your grill. If grill’s actual

temperature is below 160ºF, pressing the power button will simply turn the grill off.

• When the power button is used to shut down your grill, the Smart Grill Technology™ processor will

stop adding pellets to the fire pot and the fan will continue running to completely burn the pellets

remaining in the fire pot. During this cooling process, the display screen will display COOL.

Temp UP and DOWN button: Press the buttons to select computer-maintained temperature in 5º

increments. (Range: 180ºF - 500ºF)

Additional Temperature settings: FULL

FULL: FULL will display as actual temperature when Temp Up button is pressed beyond 500ºF.

Grill will feed pellets to the fire at the 100% of auger capacity. This will produce the highest

temperature possible, given environmental conditions / type of pellets used.

OPERATING YOUR LONE STAR CHEF

PELLET GRILL