Instruction Manual

- 3 -
1.3 How to Setup the Camera?
1. Power on the Camera
Long Press the ON/OFF button for 3 Seconds, the camera will be powered on; At this time
ON/OFF LED is orange, also mode LED and battery indicator LED is also light up. After camera
detect SD card, the LED will turn green.
Note: If ON/OFF LED is showing orange all the time and flickering, it means SD card is not
insert right, or something wrong with the SD card, please reinsert SD card in the right direction
or change SD card to test.
2.Connect Camera WIFI
After ON/OFF LED turn Green, you can use your phone to connect the camera WIFI’s SSID.
5.After connected successfully, the ON/OFF LED on camera will flicker in green, this means
your phone is already connected with the camera WIFI.
Note: if you forgot the SSID of the device, you can quick press ON/OFF button for three times,
then there will be a “CamInfo.txt” file generated on SD card, and you will get the info on SD
card.
3. How to use APP ?
After connected camera WIFI, open the Lone Wolf APP, click Add New Camera to follow the
instructions to add the device you connect.