Instruction Manual

- 15 -
modes.
4. Please format the SD card with camera before using or when camera stops taking images.
6.3 Night Vision Flash Range Doesn’t Meet Expectation
1. Please check to make sure that batteries are fully charged or left power is enough;
2. High-quality 1.2V NiMH rechargeable AA batteries can also offer much better IR flash range;
alkaline batteries cannot deliver enough amperage to power the illuminator consistently at
night;
3.To ensure accuracy and quality of night time image, please mount camera to dark
environment without any obvious light sources;
4. A certain surroundings (like trees, walls, ground, etc.) within flash range can get you better
night time images; please do not aim camera to total open field where there is nothing within IR
flash range to reflect flash back; it’s like shinning a flashlight into sky in night, you just can’t see
anything; same does camera;
6.4 Photos Do Not Capture Subject of Interest
1. Check the “Sensor Level” (PIR sensitivity) parameter setting. For warm environmental
conditions, set the Sensor Level to “High” and for cold weather use, set the sensor for “Low”.
2. Try to set your camera up in an area where there is not a heat source in the camera’s line of
sight.
3. In some cases, set the camera near water will make the camera take images with no subject
in them. Try aiming the camera over ground.
4. Try to avoid setting the camera up on small trees that are prone to being moved by strong
winds.
5. Remove any limbs which are right in front of the camera lens.
7. Warranty
With great pride and full confidence in our products, we always keep our words which are
given to our customers as specified warranty terms and services below. Based on a strict QC
system, we initially offer all our customers one year long time limited warranty, come along with
selectable chargeable renewal policy of warranty as one, two, three, or four years.
Our products are warranted against defects in materials and workmanship for a period of one
year from the date of original purchase. If a defect exists, we will, at our option and to extent
permitted by law will (1) repair the product at no charge using new or refurbished parts; (2)
exchange the product with a functionally equivalent product that is new or refurbished.
Provided the product is returned freight charge paid.
This warranty excludes damage resulting from abuse, accident, modifications or other causes
that are not defects in materials and workmanship, or by someone other than our authorized
technicians. This warranty only covers failures due to defects in materials or workmanship