Instruction Manual

- 10 -
SD
Size
Capacity
4 GB
8 GB
16 GB
32 GB
Photo (pictures)
5MP
3350
6935
13210
27920
8 MP
2048
4205
8070
17061
12 MP
1310
2701
5190
10965
Video (hours)
640x480
04:01:48
08:20:44
16:05:45
33:56:02
HD
02:50:42
05:52:35
11:38:43
24:09:16
FHD
01:58:31
04:27:27
08:30:21
18:04:52
3.5Attention
1. Insert the SD memory card correctly, camera does not support SD card hot swap (insertion).
2. Please use high-quality AA batteries in order to prevent battery cells from corrosion of leaked
acid.
3. Use right adaptor (12V/2A) of this camera to supply power, and do not invert the electrode
when put in batteries.
4. In Test mode, camera will automatically enter into arm mode in 3 mins if there is no APP
connect.
5. Don’t interrupt power supply during firmware upgrade, please deliver it back to factory if the
device doesn’t work after upgrading.
6. Do not frequently insert or pull out SD card and battery or plug in and out the adaptor when
the camera is on.
7. Do not have any floating objects, such as leaves, strings, or ribbons in the 3M motion
detection zone of cameras, to avoid mistaking photograph or videos.
8. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light,
etc. to avoid mistaking photos or videos.
9. Camera is with a 100° FOV lens and 32pcs IR LEDs. To ensure these IR LEDs can give
enough flash that high quality AA batteries must be applied accordingly to deliver enough
amperage to power the illuminator consistently in dark environments.
10. Programmed Date/Time can be saved in camera for 12 hours as long as camera was
powered 1 hour above.
3.6 Key Features
 Equipped with Ultimate Aim Technology
 Concealment Skin included
 Quick clip attachment bracket