Installation & Assembly

ALFRESCO BENCH 22
ASSEMBLY INSTRUCTIONS
lolldesigns.com 1-877-740-3387
2
COUNT
SIDE
2
COUNT
END
2
COUNT
SIDE SLAT
1
COUNT
MIDDLE SLAT
1
COUNT
BRACE
16
COUNT
INCLUDED PARTS
7/8˝ BOLT
(ORANGE)
5/32˝ ALLEN
WRENCH
INCLUDED HARDWARE
ASSEMBLY INSTRUCTIONS
ATTACH ENDS AND SIDES ATTACH MIDDLE SEAT SLAT ATTACH SEAT SLATS
1 2 3
*Please read Assembly Tips before beginning assembly.
Fit Ends into groove track cut outs of Side. Place Blocks G
into End pocket cut outs. Insert Bolts through the Blocks G
into the Side and finger tighten. Fit Brace into the middle cut
out of the Side and attach using Block G.
Repeat this step to attach the opposite Side.
Fit the Side Slat groove track cut outs over the Side and
Ends. Place Blocks G into the notch cut outs of the Ends
and insert Bolts through the Blocks G into the Side Slat and
finger tighten.
Fit the Middle Slat groove track cut outs over the Ends.
Place Blocks G into the notch cut outs of the Ends and insert
Bolts through the Blocks G into the Middle Slat and finger
tighten. Repeat Step 2 to attach seconds Side Slat.
*Using provided wrench securely tighten all bolts.
16 1
COUNT COUNT
* It is very important that you finger tighten all bolts into inserts to ensure that you do not cross-thread bolts and inserts before tightening. It
will also be easier if you wait to tighten bolts until you have all bolts installed and the piece completely assembled. This will allow for more
movement of individual pieces and help in aligning holes with inserts. Use the Allen Tool provided to finish tighten bolt until snug.
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
1/2" G Block
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step 3
repeat step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
Step 1 and repeat
step 2
Step
3
repe
at step 2 for other side
Side (X2)
End (X2)
Side Slat (X2)
Middle Slat
Brace
7
8
" Bolt yellow (X16)
G Block (X16)
BLOCK G