Use and Care Manual

ASSEMBLY INSTRUCTION

Please read the instruction carefully before assembly.

Part # Reference Image Description

QTY

Left Seat Base

Right Seat Base

Left Cushion

Right Cushion

Leg

Connection Leg

Back Cushion

Washer

Thumb Bolt

Nut

PAGE 1
ASSEMBLY INSTRUCTION Please read the instruction carefully before assembly.
PAGE 2
Please check and make sure you have all the parts available before you start with the assembly. Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used. ......................... G D .................... B .................... STEP 1 Lay down seat bases and align them. ......................... C ......................... A ...................
PAGE 3
STEP 2 Uncover the cloth using the hook & loop velcro. There are 5 screw holes to insert and screw thumb bolts. 1 2 3 5 4 STEP 3 Secure the two seat bases with thumb bolts. The second screw hole is used to install the connection leg. Insert the thumb bolt into the mounted position and screw the nut. Then attach the seat bases by using the connection leg, thumb bolt and nut. Ensure all thumb bolts are completely tightened. Then seal the cloth. 1 ......................J 2 3 .......................
PAGE 4
STEP 4 Put one washer on one leg, then insert threaded leg into the mounted position. Gently screw the leg into seat bases. Make sure the leg is screwed tightly. Repeat the same process for the other 3 legs. H....................... E....................... STEP 5 Unfold back panels and place seat cushions and back cushions properly. CAUTION! THE SOFA CAN ONLY BE USED ON A FLAT SURFACE TO AVOID ANY FALL DOWN . Care and Maintenance 1. Do not place it near any fire, heater, or flame. 2.