ASSEMBLY INSTRUCTION Please read the instruction carefully before assembly.
F Left armrest 1 G Plastic Washer 4 H Screw (M8×45) 8 I Screw washer 8 J Hex key 1 K Pillow 1 Please check and make sure you have all the parts available before you start with the assembly. Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used.
STEP 1 Put right armrest on the ground, then put the chair base on the right armrest. Please make sure the bottoms of chair base and armrest are at the same level. Uncover the cloth of chair base using the hook & loop velcro. There are 4 screws need to be screwed. Put one screw washer on each screw, then insert the screw into the mounted position. Please do not tighten any screw to the end before you’ve connected all screws. H I D H E STEP 2 Repeat step 1 to screw the left armrest.
STEP 4 Put one plastic washer on one chair leg, then insert threaded leg into the mounted position. Gently screw the leg into chair base. Make sure the leg is screwed tightly. Repeat the same process for the other 3 legs. G A STEP 5 Place pillow properly. Finish and enjoy your chair. CAUTION! THE CHAIR CAN ONLY BE USED ON A FLAT SURFACE TO AVOID ANY ACCIDENTS. Care and Maintenance 1.Do not place it near any fire, heater, or flame. 2.
