Use and Care Manual

STEP 1
STEP 2
Repeat step 1 to screw the left armrest. Then, seal the cloth of the chair base.
STEP 3
Please stand behind the chair and gently inse t the chair back into the chair base. Firmly but gently,
push the chair back downwards until the back rest is fully slotted and locked into position.
Please make sure there is no gap between the chair back and the chair base.
E
D
H
E F
D
r
Put right armrest on the ground, then put the chair base on the right armrest. Please make sure the bottoms
I
of chair base and armrest are at the same level. Uncover the cloth of chair base using the hook & loop
velcro. There are 4 screws need to be screwed. Put one screw washer on each screw, then insert the screw
into the mounted position. Please do not tighten any screw to the end before you’ve connected all screws.
H
E
F
Seal the cloth
C
Chair back
Chair base