Instructions / Assembly

SEMBLY INSTRUCTION

Part #

QTY

A 2

Please check and make sure you have

all the parts available before you start

with the assembly.

Assembly should be performed on

a clean and soft surface, e.g. flat

carton box can be used.

Washer

Chair Back

Chair Base

Please read the instruction before assembly.

Reference Picture

Front Leg

Rear Leg

Cushion

........................C

..........................D

.......................................E

.......................................A

..........................B

Description

PAGE 1
ASSEMBLY INSTRUCTION Please read the instruction before assembly. Reference Picture Description QTY A Front Leg 2 B Rear Leg 2 C Chair Back 1 D Chair Base 1 E Cushion 1 F Washer 4 Part # Please check and make sure you have all the parts available before you start with the assembly. Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used. ........................C ..........................D .......................................E ...................
PAGE 2
Step 1. Please stand behind the chair base and gently insert chair back into the chair base. Firmly but gently, push the chair back downwards until the back is fully slotted. Please make sure there is no gap between the chair back and the chair base. ...............................C Chair back Chair base Step 2. Lay down the chair base. Put one washer on one forth leg, then insert threaded leg into the mounted position. Gently screw the leg into chair base. Make sure the leg is screwed tightly.