Use and Care Manual

ASSEMBLY INSTRUCTION

Please read the instruction carefully before assembly

Part # Reference Image Description

Chair Back

Chair Base

Washer

QTY

A 2

Please check and make sure you have

all the parts available before you start

with the assembly.

Assembly should be performed on

a clean and soft surface, e.g. flat

carton box can be used.

Rear leg

Front leg

AC18800

PAGE 1
ASSEMBLY INSTRUCTION Please read the instruction carefully before assembly Part # Reference Image AC18800 Description QTY A Front leg 2 B Rear leg 2 C Chair Back 1 D Chair Base 1 E Washer 4 Please check and make sure you have all the parts available before you start with the assembly. Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used.
PAGE 2
STEP 1 Please stand behind the chair and gently insert chair back into the chair base. Firmly but gently, push the chair back downwards until the back is fully slotted and locked into position. Please make sure there is no gap between the back and chair base. Wrong match Wrong match C D Correct match Chair back Chair base Please insert 2 sides of C parallel,do not tilt. STEP 2 Lay down the chair base. Put one washer on one leg, then insert threaded leg into the mounted position.