Owners manual

Fig. 8
Kickdown Kit shown installed with Lokar Throttle
Cable (not included) and Lokar Carburetor Bracket
and Springs (not included)
Kickdown
Cable
Housing
Throttle
Cable
Housing
Ferrule
Cable
Adjuster
Carburetor
Bracket
Carburetor
Base
Carburetor
Throttle Arm
Kickdown
Mounting
Bracket
Tear Drop
Cable End Stop
Kickdown
Throttle Body
Fitting
Hex Carb
Fitting
Carb End
INS0007 Rev. 02/01/2017
Page 2
© 2005 Lokar, Inc.
Fig. 6
Carburetor Bracket
# SRK-4000
(not included)
Adjuster Nuts
(not included)
Throttle Cable
Adjuster
(not included)
Kickdown
Mounting
Bracket
Kickdown
Cable
Adjuster
Adjuster
Nuts
#8-32 x 1/2"
Button Head Bolt
with Nylock Nut
Fig. 3
Transmission End, C6
Inner
Wire
Trans
Cable
Bracket
Kickdown
Lever
5/16"-18 x 1" Button Head
Bolt and Nylock Nut
Cable
Housing
Shift Arm
Assembly
(not included)
Shift Arm
Assembly
(not included)
Kickdown
Lever
Inner
Wire
Inner
Wire
Kickdown
Lever
Trans Cable
Bracket
5/16"-18 x 1" Button Head
Bolt and Nylock Nut
Cable
Housing
Cable
Housing
C4 Transmission C6 Transmission
Fig. 4 Fig. 5
Trans Cable
Bracket
Casting
Lug
Ford C4 and C6 Hi Tech Kickdown Kit Installation Instructions
Fig. 7
With the braided stainless steel Cable Housing, slide the Ferrule down the
Housing past the cut line before cutting the Housing.
Cut Line
Inner Wire removed
before cutting the
Cable Housing
Transmission
Ferrule slid past the cut line