® COMBI - PUMP ® Patented ® COMBI -PUMP ® PATENTED Sole Distributor AIRGUNSPORT LTD Universe House, Key Industrial Park, Planetary Road, Willenhall, West Midlands, WV13 3YA England TEL: 01902 722 144 Fax: 01902 722 880 Service Line Tel: 01902 738 070 www.logun.com www.airgunsport.com e - mail: logun@airgunsport.
5 ® COMBI -PUMP ® PATENTED TROUBLE SHOOTING A Possible Problem Possible Solution B F C When I start pumping the gauge will not move. Check that the bleed screw has been tightened up. Air could be leaking out from the vent hole The bleed screw is tight but the pressure gauge will still not move when I pump. Ensure that all the connections along the pipe work and the Snap - On connector has been tightened correctly.
1 4 THE OPERATION OF THE LOGUN COMBI - PUMP CONGRATULATIONS PLEASE READ THIS BEFORE USING THE LOGUN COMBI - PUMP: Welcome to the LOGUN family. Having bought this LOGUN product, you have become a member of a group of people, who not only insist upon but expect nothing but the best. Logun’s motto is “To make the best, or to make the best better”. This is why LOGUN has joined with AXSOR in Sweden to launch the LOGUN COMBI - PUMP.
2 3 ASSEMBLY OF LOGUN COMBI - PUMP COMBI - NATION FITTINGS Diagram A The LOGUN COMBI - PUMP has been manufactured to exceptionally high standards to give the operator a wide variety of choices and set ups when filling a pneumatic air rifle. Please see below for the settings that can be achieved. Shows the pump unit ready for assembly with all the parts including the Allen key for putting the base together.
