Instruction Manual

23
DO follow the rules of safe shooting on page 5 of this manual.
DON’T overcharge the rifle, this will result in a loss of power and could
damage the internal seals.
DO bleed off excess air from the filling hose prior to pulling the probe out.
DO have your rifle serviced every two years - this is a condition of your
lifetime warranty.
Problems
In the unlikely event of your Logun MkII showing signs of
malfunctioning or of reduced performance, DO NOT attempt to
rectify the problem yourself. Please contact your dealer or call the
Logun Service Line where they will either talk you through any
simple rectification or arrange for the rifle to be returned to the
Service Centre for repair.
Logun Service Line - 01902 738070
DO clean your rifle with a synthetic based spray such as Logun SL7 applied to
the rifle by spraying it on a lint free cloth then wipe over rifle.
DON’T spray synthetic based spray Directly onto the rifle, always apply by
spraying it on a lint free cloth.
DON’T use silicone oils or greases.
DO remove the stock from the action before drilling the stock to fit sling swivels.
DON’T leave the filling chamber exposed, always rotate the dust cover.
DO use a synthetic grease, such as Logun SG1, on the filling probe, this will
increase the life of the o-ring seals situated on the probe body.
DON’T rely on the safety catch to provide guaranteed safety.
Do’s and Don’ts
SECTION 7