User Guide

Page 16
Installing the Wall Mount
Setup of your UTREL30-WiFi is complete.
Attach the Wall Mount Bracket on the side of your
refrigerator or freezer, preferably at eye-level with the
adhesive strip provided with the Wall Mount.
Before sticking on the Wall Mount, make sure the
probe cable and the USB cable from the
UTREL30-WiFi can both reach the device comfortably
without obstruction or at risk of being accidentally
disconnected if knocked.
Insert the UTREL30-WiFi
into the Wall Mount, connect
the USB and sensor cables.
The display should show
the word “READY” as seen
in the image (right).
Note: Both the cloud and
WiFi symbols are showing
in the top left with a tick in
each to confirm successful
setup of the device.