User Guide
Table Of Contents
Page 15
Connect your UTREL30-WiFi
to your computer via the USB
cable provided. The USB
socket on the device is located
on the bottom, protected by a
rubber seal.
Conî›™guration through
LogTag Analyzer
1. Select Configure from the LogTag menu or select
the Wizard icon.
2. Adjust your logger configuration settings as
required.
For more information on configuration settings, please
refer to
Configuring the UTREL30-WiFi in the Product
User Guide or press F1 for help.
3. Select Configure to upload the configuration
settings to the logger.
4. Select Close to complete and exit the configuration
page.