User Guide

Page 12
Remote Conguration
through LogTag Online (continued)
2. Navigate to Location screen and select to edit
the location created for the first channel of your
registered device.
Manually register your device if you cannot see the
location. The second location will need to be created
manually. Each channel can be assigned to its
location. Please refer to the Activation Codes section
in the LogTag Online User Guide for more information.
The probe inserted into the loggers CH2 port
will automatically register as CH1 in the location
description when only one probe is inserted into the
logger.
Note: When registering your UTREL30-WiFi Dual Channel
Logger to your LogTag Online account, a location is auto-
created for the first channel when your team has a location
slot available from your current activation code;
• As soon as your device has been identified
through the Connection Wizard,
• Manual registration by selecting Register Device
in the registered devices table on the Dashboard
or in the Devices screen.