SAFETY INFORMATION caution Please carefully read the following Important safety Information before: handling or Installing this shower door. Hers is a risk of serious injury while handing this product. To minimize these risks, please note: Always wear safety glasses and gloves whi handing. Always follow the installation instructions. Inspect glass for damage before installation.
ESSENTIAL ACCESSORIES LIST NOTE: Inspect all parts for missing prior to Installation! Contact us for any part missing.
‘Steeplejack the wall jamb on the wall and calibrate it with a level. Use a pencil to mark the locations of the three per-drilled holes and outline the wall jamb (Dx1). Drill the holes to the wall per the per-drilled position using @1/4" drill bit. Use a hammer to insert the wall anchor the drilled heel. Attach wall Jamb the wall using the ST4x30 tapping screw WARES hss da tb site, rent Bi pin cox 18 ert Pap. gm Ion NOTE: Qur shower door Is affixed with explosion-proof film.
Step: Install the shower door. Insert the shower door Use a @1/8" drill bit to drill three holes on the inside of the wall ‘| jamb. Drive ST4x12 (@x3) tapping screws into the drilled holes in sequence. Secure the decorative cover with screws. Step 4 :Apply silicone sealant on tha seams between tha shower door and the shower base/ threshold, and between the wall and the shower door. NOTE: 1. Before using silicons, the surface needs to ba clean and free of debris. 2.
SHOWER DOOR MAINTENANCE MANUAL Cleaning: 1.When cleaning the farm, glass and hardware accessories of the shower door, please use a soft cloth. If thees is slight dirt, please use a soft cloth or sponge dipped in "neutral detergent® for cleaning. After removing the stubborn dit, please rinse with platy of water to prevent the cleaning agent from remaining on the surface of the shows door and causing corrosion damage.
