Installation Guide

Wall Mount Shower Arm

Installation steps

Required Tools:

Adjustable Pliers and Sealant Tape

1、Unthread old showerhead and shower arm

and clean threads of pipe in wall.

2、Slide the flange over the longer end of the new

shower arm.

3、In a clockwise direction, apply 2-3 complete wraps

of thread sealant tape to each end.

4、Thread long end of shower arm into fitting inside of

wall. Hand tighten only.

5、Attach showerhead per manufacturer’ s

instructions.

6、Turn on water and check for leaks. If there are any

leaks, uninstall, apply additional thread sealant tape

and re-install.

PAGE 1
Wall Mount Shower Arm Installation steps Required Tools: Adjustable Pliers and Sealant Tape 1、Unthread old showerhead and shower arm and clean threads of pipe in wall. 2、Slide the flange over the longer end of the new shower arm. 3、In a clockwise direction, apply 2-3 complete wraps of thread sealant tape to each end. 4、Thread long end of shower arm into fitting inside of wall. Hand tighten only. 5、Attach showerhead per manufacturer’ s instructions. 6、Turn on water and check for leaks.