Getting started with Logitech® Keyboard Case for iPad® 2
Charge the Keyboard Case Special function keys Plug the micro-USB cable into the micro-USB port on the Keyboard Case. Plug the other end of the cable into a powered USB port on a computer. The Keyboard Case has special function keys to give you more control of your iPad 2. Home Displays the iPad 2 home screen Power on the Keyboard Case and pair with iPad 2 The Keyboard Case’s Bluetooth keyboard should only need to pair to your iPad 2 once as follows: 1. On the Keyboard Case, slide the power switch on.
Storing the iPad 2 for travel Battery To store the iPad 2 1. Line up the 30-pin port connecter on the iPad 2 with the slot on the short end of the Keyboard Case. 2. Place the iPad 2, screen down, into the Keyboard Case. The Keyboard Case uses a long-life, rechargeable battery that gives you several weeks of normal use. The Keyboard Case goes into sleep mode if it’s left on and not being used. Press any key and wait a second or two to bring the Keyboard Case out of sleep mode.
Rechargeable Batteries Warning. Your device contains an internal, rechargeable battery that is non-replaceable. In general, the life expectancy of such batteries is dependent upon usage. Heavy daily use will result in shorter battery life. Casual use will extend battery life. If you suspect that the rechargeable battery inside your device may be drained (has a low charge), try charging it. If the battery does not recharge after several attempts, it may be non-operational.
