Quick Start Manual

Logitech Squeezebox Boom

Set up Squeezebox Boom and connect it to your

network

Slide open the battery compartment door on the remote to expose the battery, peel 1.

the protective tab from the battery, and then close the battery compartment door.

Optional:2.

If you’d prefer to connect to your network using a wired connection,

connect your own ethernet cable now.

Slide the plug adapter into the power supply and make sure it snaps into place. Plug 3.

the barrel connector into the AC input on Squeezebox Boom’s rear panel.

Plug the power supply into an electrical outlet. Squeezebox Boom will automatically 4.

power on.

Press 5.

RIGHT

on the remote, or press the scroll wheel on the front panel. (As covered

in Getting to know Squeezebox Boom, the

and

DOWN

buttons on the

remote perform the same function as turning the wheel left or right. Pressing

RIGHT

on the remote performs the same function as clicking the wheel. For the rest of this

section, we’ll refer to using the various buttons on the remote, but you can use the

scroll wheel as well.)

You’ll see a menu giving you the choice of connecting via a wired or wireless 6.

network. Use the

and

DOWN

buttons to make your selection, and press

RIGHT