Operation Manual

 English
Logitech
®
Wireless DJ
™
Music System User’s Guide
3 Turn On the Wireless DJ Remote
When prompted by the Setup Wizard, insert the battery into
the Wireless DJ remote to turn it on.
On the LCD screen of the remote you should see a “Trying to
Connect” screen followed by a “Connection Successful” screen
(see LCD Screens - Initial Connection later in this manual for more
details).
A green checkmark in the Setup Wizard veries the wireless connection with the PC.
After establishing a connection, the StreamPoint software checks the rmware version
of the remote. If required, at this point you will be guided through the necessary steps
to update the rmware.
Note Be sure to remove the transparent lm from the front of the remote’s LCD screen
before trying to use it.
4 Turn On the Music Receiver / Dock
When prompted by the Setup Wizard, connect the supplied power cable and adapter
to the back of the Music Receiver / Dock, and then plug the power adapter into an AC ACAC
outlet.
The Music Receiver / Dock must be less than 50 meters (150 feet) from the USB Music
Transmitter. (The maximum effective range depends on a number of environmental factors,
and will probably be less than this distance.) The receiver LED is initially red, and turns blue
after achieving a successful wireless connection.
Verify the connection when a green checkmark appears in the Setup Wizard.
5 Connect the Music Receiver / Dock to Your Stereo
When prompted by the Setup Wizard, connect the Music
Receiver / Dock to your stereo amplier using the included
RCA audio cable. Alternatively, you can connect to
powered multimedia speakers using the stereo-mini
(3.5 mm) output on the back of the Receiver / Dock.
Using the Setup Wizard, test the Logitech Wireless
DJ Music System by playing a short test song Music System by playing a short test songMusic System by playing a short test song System by playing a short test songSystem by playing a short test song
(click on the Play Test button).
•
•
•
•
•
•
•
•
•