Wireless Rechargeable Touchpad T650 Setup Guide
Logitech Wireless Rechargeable Touchpad T650 Your Touchpad T650 Power port Battery Status light Power switch Micro-USB charging cable 2 Unifying receiver
Logitech Wireless Rechargeable Touchpad T650 Set up your Touchpad 1. Plug in the receiver 2. Power on the Touchpad Plug the Unifying receiver into a USB port. Move the power switch to the On position. Check the battery status light. Red means it’s time to charge the battery.
Logitech Wireless Rechargeable Touchpad T650 Set up your Touchpad 3. Software installation Visit the Product Page You are prompted to install Logitech software that enhances your Touchpad experience with additional gestures, smoother performance, and personalized settings. While you’re online, check out the Touchpad T650 Product Page, your destination for world-class support. Follow the onscreen instructions to complete installation. No prompt? Download the software from: www.logitech.
Logitech Wireless Rechargeable Touchpad T650 Touchpad gestures Click (left-click) Scroll Press the Touchpad surface. Swipe two fingers up, down, or sideways. Right-click Press the lower-right corner of the pad.
Logitech Wireless Rechargeable Touchpad T650 Touchpad gestures Perform Windows 8 shortcuts Navigate Swipe a single finger from one of the Touchpad edges. Swipe three fingers to navigate within Windows 8. Swipe from the left edge to cycle through open applications. Swipe from the right edge to display the charms bar. Swipe from the top edge to display the application bar. Swipe up to return to Windows 8 Start. Swipe left or right for back and forward. Swipe down for the desktop.
Logitech Wireless Rechargeable Touchpad T650 Touchpad gestures enabled by software The Logitech software enables all available gestures and provides videos that demonstrate the best way to perform them. If you haven’t already installed it, go to www.logitech.com/download/t650 Control windows Zoom Swipe four fingers to resize or relocate the active window. Pinch to zoom in or out. Swipe up or down to maximize or minimize the window.
Logitech Wireless Rechargeable Touchpad T650 Charge the battery Unifying Connect the Touchpad to your computer using the supplied charging cable. The status light blinks green while charging. Logitech® Unifying technology connects up to six compatible Logitech mice and keyboards to the same receiver, using only one USB port for multiple devices. To learn more, visit: Charge your Touchpad until the status light stops blinking. A full charge powers your Touchpad for about a month.
Logitech Wireless Rechargeable Touchpad T650 Troubleshooting Battery disposal Touchpad not working? Remove the plastic label on the Touchpad base. Remove the four screws from the bottom case. • Restart the Touchpad by turning it off and then back on. • Check the Unifying receiver connection. • Move the Unifying receiver to another USB port on your computer. (Try connecting directly to your computer instead of using a USB hub.) Unplug the battery and take it out of the case.
Support www.logitech.com/support/t650 United States . . . . . . . . . . . . . . . . . .
www.logitech.com © 2012 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Apple, Mac, and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual.
