Owner's Manual

15
4. Setting up Activities for your Harmony One
To set up Activities, you need to enter the information related to the Activities you will
be using on your Harmony One. The Harmony Remote Software shows you a selection of
recommended Activities based on the device information you provided.
When you set up Activities, the software asks questions about the function of each device.
For example, if you set up the Watch TV Activity, you’re asked which device changes the
channels (TV or satellite/cable box). If you only have one device that is capable of doing
something, then the software skips the question. For example, if you only have one TV,
the software doesn’t ask you which device displays video.
If the device has more than one input, the software asks you which input the device
needs to be set. If you’re not sure which input a device uses, see Determining your inputs
for more information.
3. Setting up the devices you want to control
The guided online setup asks you to enter your device information. Enter the information
for all the entertainment components you want to control with your Harmony One. You
should use the Device Worksheet to gather all your device information before starting the
setup process.
Select the Device Type for each of your devices.
Select the Manufacturer for each device.
Enter the Model numbers for each device.
1.
2.
3.
Adding new devices at a later time
If you want to add newly acquired
devices after the initial setup, see Adding
and changing your devices.
Activities are the basis for how the Harmony One
works. With Activities, the Harmony One eliminates
the need to use multiple remotes for simple tasks.
Just select the Activity and the Harmony One does
the rest. For more information on Activities, see
Adding and changing your Activities.