Operation Manual




The Pure-Fi Dream
™
uses an advanced, high-fidelity acoustic design. The acoustic system uses:
• (2) 3/4” high-definition, soft-dome tweeters
• (2) 3” high-power, long-throw woofers
Pure-Fi Dream
™
sound field can be adjusted to your personal listening preferences using the bass, treble and
Stereo XL adjustments described above.


• Make sure that
Pure-Fi Dream
™
is on.
• Make sure that the iPod input is selected.
• Make sure that the volume level


is at least half way up. Use the volume dial
 to adjust.
• Try turning off the Sound Check feature on your iPod.
• Download the latest version of iTunes (available at apple.com) and upgrade your iPod to the latest
iPod firmware.

• If you have a newer iPod, a Universal Dock adapter for your iPod should have been included with
your
iPod when you purchased it.
• If you have a 1st, 2nd, or 3rd generation iPod model, you need to use the Aux input connector on the
back of Pure-Fi Dream
™
. (1st / 2nd generation iPod models do not have a dock connector.
3rd generation iPod models are not supported by the Pure-Fi Dream
™
’s Universal Dock.)

• Rotate your Pure-Fi Dream
™
.
• Remove your iPod from the Universal Dock.

• Make sure that the
Pure-Fi Dream
™
power cord (the cord between the speaker and the power supply)
is fully extended. Leaving the power cord coiled up will result in poor reception.

• Point the remote directly at
Pure-Fi Dream
™
.
• Make sure the remote sensor isn’t being blocked. (It is located next to the display).
• Try using a fresh set of batteries.
