Operation Manual







To set the alarm settings:

1. Press and hold alarm 1 ( ) or alarm 2 ( ) for 1 second.

2. Alarm time: Use the tuning dial ( ) or the buttons on the remote to change the time.

Press select ( ).

3. Use the tuning dial / remote to select the alarm source. Options are: iPod, AM, FM,

and buzzer. Press select ( ). If you selected iPod as the alarm source, select the desired playlist for

the alarm. If you selected radio, select the desired radio preset for the alarm.

Press select ( ).

4.  Use the tuning dial / remote to select the alarm volume. Press select ( ).



• To immediately exit from any of the alarm settings screens, press alarm 1 ( ) or alarm 2 ( ).

• By default, playlists assigned to an alarm will be shuffled. To turn off shuffle, press the shuffle

( ) button when selecting the playlist.



Using the snooze feature will temporarily turn off an active alarm for several minutes – allowing you

to get a few more minutes of sleep. To activate the snooze feature:

• Press snooze (

) OR

• Wave your hand above the speaker (the motion sensor will activate snooze automatically)



• When a snooze timer is active, the number of minutes before the alarm sounds is shown in the

upper-left corner of the display.

• The length of the snooze timer can be set in the speaker menu.



Resetting an alarm turns it off for the rest of the current

day and automatically enables it for the following day.

To reset an alarm, do either of the following:

• Press power ( ). This will also turn the speaker off.

• Press a source button (iPod, AM, FM, aux).

This will keep the speakers on and switch to the

selected source.





Snooze