Setup Guide

6
Position the Harmony Express blaster and mini-blaster
The blaster receives commands from the remote and then sends the commands
to your entertainment devices in the form of Bluetooth, Wi-Fi, and IR (infrared)
signals*.
Once plugged in, the blaster takes approx. 30 seconds to power up. The LED will
glow red when plugged in.
Use your mini-blaster to extend the range of the blaster. The mini-blaster can be
placed where the blaster can’t reach (for example, inside of a closed cabinet).
Connect your mini-blaster to the jack behind the blaster.
*Harmony Express needs the blaster to send and receive IR commands.
The Harmony Express remote cannot be used without the blaster set-up.