600-Series Harmony Remote User Manual version 1.
User Manual 600-Series Harmony Remote Table of Contents INTRODUCTION ......................................................................................................................................................1 GETTING TO KNOW YOUR HARMONY REMOTE ..........................................................................................................2 BEGINNING THE SETUP PROCESS .....................................................................................................................
User Manual 600-Series Harmony Remote Introduction Congratulations on the purchase of your Harmony remote! This User Manual will introduce you to the basic online setup process, customizations and main features of your Harmony remote. If in doubt about how to set up your Harmony remote, follow the information and instructions using the Logitech Harmony remote software (also referred to as Harmony remote software). The Harmony remote is an Internet-powered universal remote control.
User Manual 600-Series Harmony Remote Getting to Know Your Harmony Remote Many of the Harmony remote’s buttons are standard remote buttons. However, there are buttons and other hardware that may not be so familiar to you. The extra buttons and hardware give you access to the special features of the Harmony remote. 1. USB Connector: Connect one end of the USB cable to this connector and the other end to your computer so that you can download your configuration using the Harmony remote software. 8.
User Manual 600-Series Harmony Remote Beginning the Setup Process Once you have installed the Logitech Harmony remote software, connect your remote and you will be guided through a series of question-and-answer steps to complete the online setup process: Login Information: Create your login information. Check Connection: Ensures your computer and your Harmony remote are communicating properly. Set Up Devices: Helps you provide us with information about the devices in your personal home theater system.
User Manual 600-Series Harmony Remote Using Your Harmony Remote This section provides you with information that will help you use your remote. Selecting an Activity View the Activities you have added by pressing the Activities button. The display will then list the Activities you have added. Press the corresponding display button next to the Activity you want to start.
User Manual 600-Series Harmony Remote Controlling Individual Devices This section provides you with an overview of three modes you can use to access specific features of each device. Device Mode Press Device to enter device mode. Device mode gives you access to all the possible commands for each device included in your Harmony remote configuration. To access device mode you do not need to be in an Activity. However, you should never need to use Device mode during normal use of your Harmony remote.
User Manual 600-Series Harmony Remote Customizing Your Harmony Remote All customization of your Harmony remote is done from the Harmony remote software: Use the Harmony remote software to: • Troubleshoot • Add or delete Activities • Add or delete devices • Change the settings for the remote • Get support • Update the remote Update the remote after you have made changes your configuration or settings. This will ensure you have the latest configuration and settings on your Harmony remote.
User Manual 600-Series Harmony Remote The change behavior of buttons feature shows you the: • Buttons that have a command associated with them • Device being controlled • Command being sent to the device Adding Custom-Labeled Buttons Use the Harmony Remote Software to: • Add custom-labeled buttons to a device. • Add a custom-labeled button for an Activity. Custom-labeled buttons are displayed on the Harmony remote’s display from left to right, top to bottom.
User Manual 600-Series Harmony Remote looks for commands with these names to automatically assign them to the volume up and down buttons on the Harmony remote. Naming Conventions When naming a command for which there is no default name on the Learn infrared commands feature, use the following naming conventions to make button assignment and sharing infrared commands easier: • Do not use spaces or special characters such as /, & or * in the name. • Capitalize the start of words (e.g.
User Manual 600-Series Harmony Remote Additional Help The Harmony remote provides you with several features to assist you with: • Finding answers to your questions quickly and easily • Troubleshooting the setup and customization process Finding Answers to Your Questions The help you find answers to your questions quickly and easily, consult any of the following tools: Tool Description Search A support tool that enables you to do a keyword search.
