G580 FITS Setup Guide Yuffie G580 FITS 620-011659 00A PB1 QSG insert.
1. Complete molding setup in-app 2. Connect via LIGHTSPEED Ensure completion of setup and eartip molding through the mobile app. Lightspeed audio will not work until mobile setup is completed. Insert your wireless receiver dongle into a compatible device. Triple tap either the left or right earbud to connect to LIGHTSPEED. App Name Router interference Ensure receiver is at least 2 m away from wifi router. >2m (6.5 ft) Yuffie G580 FITS 620-011659 00A PB1 QSG insert.
Pair to your mobile/BT device Customize G580 FITS Place earbuds into the case, closing, then opening the lid. Press and hold case button for 3 seconds. Select G580 FITS on your device. Customize EQ, controls, and other settings through the MOBILE APP NAME while connected via Bluetooth®. Follow the link to download G HUB on your PC to control customize G580 FITS via LIGHTSPEED. 3 sec logitech.com/ghub Yuffie G580 FITS 620-011659 00A PB1 QSG insert.
Switch between Bluetooth® and LIGHTSPEED Triple tap the left or right earbud to switch between Bluetooth® and LIGHTSPEED. Double Tap (Bluetooth®) Double Tap (LIGHTSPEED) Triple Tap Double Tap (while receiving phone call on bluetooth or LIGHTSPEED) = Play/Pause = Mute/Unmute Mic = Bluetooth® to LIGHTSPEED = Answer/Hang up Charging Place the earbuds inside the case to charge. Connect your case to the USB-C cable to recharge the case. © 2022 Logitech.
