User's Manual

5
English
6
English
Using Your Logitech® Mobile Traveller™ Headset
Note: The features listed below are phone dependent. Check your phone user’s manual.
1. Starting a Call
Dial the numbers on your mobile phone keypad. When the call is connected, your headset will
automatically connect to the phone to take the call.
2. Using Voice Dialing
Press and release the Multi-Function Button when in standby mode. Your phone may show a voice dialing
request on the screen. A click will be heard in the Headset. After the click, speak the name of the caller.
Call voice tags are pre-recorded in the phone.
3. Ending a Call
Press and release the Multi-Function Button on the Headset when in call mode, or end call from mobile
phone keypad.
4. Answering a Call
After an incoming ring tone, press and release the Multi-Function Button once. Or, you can answer the call
with your mobile phone’s keypad. To transfer a call to your Headset, press and release the Multi-Function
Button once or use the menu on your phone.
5. Muting a Call
Press the Volume (+) and Volume (-) simultaneously for 3 seconds while in a Call. You will hear a beep the
fi rst time and every 30 seconds afterwards.
6. Ending Mute
Press the Volume (+) and Volume (-) simultaneously for 3 seconds while in Mute mode. You will hear a beep.
7. Last Number Redial
When in Standby Mode, press the Volume (-) button for at least 3 seconds. You will hear a beep after
pressing the button and the last number will be dialed.
8. Night Mode
Press all three buttons, Volume (-), Volume (+), and MPB simultaneously for 3 seconds. The light will not
display and 4 quick beeps will be heard. Pressing the same three buttons again will release the headset
from Night Mode.
Feature Summary
The Logitech® Mobile Traveller™ Headset supports three-way calling, call reject and other advanced features. See the
Headset Operation Summary Table below for a full summary of both standard and advanced features supported.
Standard Features
How to What you do What you see What you hear
Turning On
Press multi-function button (MFB)
briefl y
5 BLUE LED Flashes, then slow BLUE
LED Flashes
Brief low-to-high-tone
Receiving Incoming Call - - - 3 repeating BLUE fl ashes Melody increases in volume
Answering Call Press MFB briefl y 3 repeating BLUE fl ashes Single beep when answered
During Call - - - 4 repeating BLUE fl ashes No beeps
Ending call Press MFB briefl y 3 repeating BLUE fl ashes Single beep
Pairing Mode
From Off state, press and hold MFB
button for 10 seconds
Alternating BLUE/RED LED fl ashes,
BLUE fl ashing LED when paired
Single high-low tone beep
Standby or connected - - - 1 or 3 repeating BLUE Flashes No audio
Voice Dialing
Press MFB when in standby or
connected
4 repeating BLUE fl ashes Single beep
Mic Mute-on
Press and hold Vol(+) and Vol(-) button
simultaneously for 3 seconds
4 repeating BLUE fl ashes Beep every 30 seconds
Ending mic mute
Press and hold Vol(+) and Vol(-) button
simultaneously for 3 seconds
4 repeating BLUE fl ashes Single beep
Low Battery - - - Slowly repeating RED fl ashes Beep every 30 seconds
Turning Off Press MFB for more than 3 seconds 5 brief RED fl ashes High-to-low tone
Charging - - - Continuous ORANGE LED -
Enter Night Mode Press all three buttons for 3 seconds Nothing 4 quick tones
Release Night Mode Press all three buttons for 3 seconds 4 BLUE LED fl ashes 4 quick tones
Handsfree Functions - supported by phones that have this feature
Last Number Redial Press Volume (-) for 3 or more seconds 4 repeating BLUE fl ashes A double Beep
Incoming Call Reject Press MFB for more than 3 seconds 4 repeating BLUE fl ashes A double Beep
These features are supported by phones that support Handsfree Mode
Note: MFB stands for multi-function button; CDMA and GSM phones handle these functions differently. Please check with your
service provider and mobile phone vendor for details.
Using Your Headset
Feature Summary
Advanced Features
Headset Operation What you do What you see What you hear
3-Way Call - Release all held
MFB and Vol(-) simultaneously more than
6 seconds
4 BLUE LED fl ashes Single beep
3-Way Call - Accept Waiting Release Active Vol(+) button for more than 6 seconds 4 BLUE LED fl ashes Single beep
3-Way Calling - Accept Waiting Hold Active,
switch between waiting and active
Vol(-) Button for more than 6 seconds 4 BLUE LED fl ashes Single beep
3-Way Calling - Conference call or add held
to 3-way
MFB and Vol(+) simultaneously more than
6 seconds
4 BLUE LED fl ashes Single beep
Note: MFB stands for multi-function button