User's Manual
Table Of Contents
- Getting to Know Your HP iPAQ Bluetooth Stereo Headphones
- Installing the Headphones Driver
- Reestablishing Connection to the Headphones
- Turning the Headphones On and Off
- Using the HP iPAQ Bluetooth Stereo Headphones
- Charging the Headphones
- Before Calling Technical Support
- Technical Support on the Internet
- Preparing to Call Technical Support
- Wireless Notices
- Canadian Notice
- European Union Regulatory Notice
- Notice to France and Italy for Use of 2.4 GHz Wireless Communication:
- Brazilian Regulatory Notice
- Japanese Regulatory Wireless Notice
- Battery Warning
HP iPAQ Bluetooth Stereo Headphones User’s Guide 9
To pause audio, press the Multi Function button
To resume play, press the Multi Function button again.
To track forward, press the Forward button, marked “>”
To track backward, press the Back button marked “<“
To increase the volume, press the Volume Up button marked “+”
To decrease the volume, press the Volume Down button
marked “-”
Charging the Headphones
Note: Headphone batteries are not user replaceable.
To charge the HP iPAQ Bluetooth Stereo Headphones:
1. Turn off the headphones by pressing the Multi Function
button and holding until the light flashes red and goes off.
2. Connect the Headphones to the power adapter.
3. Plug the power adapter into an electrical outlet. The amber
light will come on while the headphones are charging.
4. When the headphones are fully charged, the light goes off.
The headphones may take up to four hours to fully charge.