MeetUp Setup Guide | Guide d’installation
WHAT’S IN THE BOX 1 2 5 6 x4 3 x4 7 Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie English Read Manual Before Product Use. 4 POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse.
WHAT’S WHAT CAMERA SPEAKERPHONE 1 2 5 34 1. Security slot 2. Remote control pairing 3. USB 4. Power 5.
REMOTE 1 3 2 4 5 6 7 8 9 1. 2. 3. 4. 5. 6. Microphone mute Call answer Call end Bluetooth® pairing Volume up/down Zoom in/out 7. Camera pan/tilt 8. Camera home 9.
Thanks for buying MeetUp. We think you’ll find the extra wide field of view will help everyone feel included in the meeting, enhancing communication. PLACEMENT We recommend placing the camera as close to eye level as possible Best results typically come from mounting below the monitor 1. Place on a table or shelf near the monitor 2. Connect the cables 3. Mount on the wall: a. Attach bracket to the wall Please use the appropriate type of screws for your wall type b. Attach the camera to the bracket 4.
CONNECTION 3. Connect the TV to the computer Connecting MeetUp is the same whether you plan on using a dedicated computer in the room, or your team members bring a laptop to the room to run the meeting 1. Plug MeetUp into power 2.
MAKE MEETUP THE DEFAULT DEVICE PAIRING MEETUP TO A BLUETOOTH DEVICE Ensure that MeetUp is chosen as the camera, speaker and microphone in your video conferencing applications Please consult the application documentation for further instructions on how to do this You can use MeetUp for audio calls when paired to a Bluetooth device To pair your Bluetooth device to MeetUp, follow these simple step: 1.
PAIRING THE REMOTE CONTROL TO THE CAMERA Your camera and remote control are paired at the factory However, if you need to pair a remote to the camera (such as when replacing a lost remote) do the following: 1. Press and hold button on the back of the camera until LED flashes blue FOR MORE INFORMATION You can find additional information on MeetUp including: – FAQs – Software to enable functions in various applications – How to order replacement parts – And more at www.Logitech.com/MeetUp 2.
