User Manual
5
ENGLISH
INTRODUCTION
Congratulations on buying the Saitek Pro Flight Throttle Quadrant. The Pro Flight Throttle Quad-
rant features realistic controls congurable for all the major ight simulation software to make
your ying experiences more realistic.
INSTALLING THE THROTTLE QUADRANT
First, screw the clamp to the throttle quadrant using the four
screws provided.You can screw the clamp to one of two sides of the
quadrant depending on how you want to mount the quadrant - either
in front and below your table or on top of it. Please note that whichever
way you choose to mount the quadrant, ensure that as you look at the unit the rocker switches
are at the bottom. Now tighten the throttle unit clamp screw mechanism until it is rmly attached
to your table (be careful not to overtighten the screw as you may damage the clamp).
Plug the throttle quadrant’s USB cable into one of your PC’s free USB ports (or Saitek Pro Flight
Yoke USB Hub).
Your throttle quadrant comes supplied with additional lever knobs to congure any combination
of throttle, aps, mixture or prop pitch. You can also buy additional quadrants to link together
for more complex multi-engined aeroplane congurations and we have included a 4-way
throttle knob which links 4 quadrant levers for control of 4-engined aircraft.