User's Manual
Table Of Contents
- Using Your Cordless Wheel Mouse in Windows® 95/ Windows® 98/WindowsNT® 4.0
- Scrolling and Zooming with the Cordless Wheel Mouse
- Using the MouseWare Software in Windows 95/ Windows 98/Windows NT 4.0
- Using the Software in Windows 3.1x
- Cordless Wheel Mouse Maintenance
- 1. Remove the retainer ring. On the bottom ofthecordless wheel mouse, twist the retainer ring c...
- 2. Remove the ball and wipe it with a clean, lint- free cloth, then blow carefully into the ball-...
- 3. If dirty, clean the roller(s) using a cotton swab moistened lightly with isopropyl (rubbing) a...
- 4. Replace the ball and retainer ring.
- Troubleshooting
- Verwendung der Cordless Wheel Mouse unterWindows95/Windows 98/Windows NT 4.0
- Bildlauf- und Zoom-Funktionen mit der Cordless Wheel Mouse
- Verwenden der MouseWare-Software unterWindows95/Windows 98/Windows NT 4.0
- Verwenden der Software unter Windows 3.1x
- Reinigen der Cordless Wheel Mouse
- Fehleranalyse
- Utilisation de la Cordless Wheel Mouse sousWindows95/Windows 98/Windows NT 4.0
- Défilement et zoom à l’aide de la Cordless Wheel Mouse
- Utilisation du logiciel MouseWare sous Windows 95/ Windows 98/Windows NT 4.0
- Utilisation du logiciel sous Windows 3.1x
- Entretien de la Cordless Wheel Mouse
- Dépannage
- Uso di Cordless Wheel Mouse in Windows 95/ Windows98/Windows NT 4.0
- Esecuzione delle funzioni di scorrimento e zoom conCordlessWheel Mouse
- Scorrimento mediante scroller
- Questo tipo di scorrimento consente di spostarsi con precisione verso l'alto e verso il basso.
- Per scorrere in su, spostare lo scroller in avanti; per scorrere in giù, spostare lo scroller ind...
- Scorrimento orizzontale
- Utilizzare lo scorrimento orizzontale in Windows 95, Windows 98 eWindows NT 4.0 per scorrere da...
- Se nella finestra vengono visualizzate le barre di scorrimento verticali e orizzontali, premerei...
- Zoom
- Consente di ingrandire o ridurre undocumento in un'applicazione che supporta questa funzione.
- Posizionare il puntatore all'interno diun'applicazione compatibile conMicrosoftOffice 97. Prem...
- Utilizzo del software MouseWare in Windows 95/ Windows 98/Windows NT 4.0
- Utilizzo del software in Windows 3.1x
- Manutenzione di Cordless Wheel Mouse
- 1. Rimuovere l’anello. Sulla parte inferiore del mouse girare l'anello in senso antiorario per ri...
- 2. Estrarre la sfera e spolverarla con un panno pulito e non lanoso, quindi soffiare delicatament...
- 3. Se sono sporchi, pulire i rulli usando unbatuffolo di cotone leggermente imbevuto di alcol is...
- 4. Rimontare la sfera e l’anello.
- Ricerca e soluzione dei problemi
- Uso de Cordless Wheel Mouse en Windows 95/ Windows98/Windows NT 4.0
- Operaciones de desplazamiento y zoom conCordlessWheel Mouse
- Uso del software MouseWare en Windows 95/ Windows98/Windows NT 4.0
- Uso del software en Windows 3.1x
- Mantenimiento de Cordless Wheel Mouse
- Resolución de problemas
- Uw Cordless Wheel Mouse in Windows 95/Windows 98/ Windows NT 4.0 gebruiken
- Scrollen en zoomen met de Cordless Wheel Mouse
- De MouseWare software in Windows 95/Windows 98/ Windows NT 4.0 gebruiken
- De software in Windows 3.1x gebruiken
- Onderhoud van de Cordless Wheel Mouse
- Problemen oplossen
- Logitech Addresses andPhone Numbers*
- Country
- Address
- Product Information (Infoline)
- Technical Help (Hotline)
- LOGITECH Benelux
- LOGITECH Representation
- LOGITECH GmbH
- LOGITECH S.A.
- LOGITECH France SARL
- Logitech Sales Office in Hungary
- LOGITECH Italia S.r.l
- LOGITECH Repräsentanz
- LOGITECH Switzerland
- D +41 (0)21 863 54 10
- F +41 (0)21 863 54 30
- I +41 (0)21 863 54 60
- D +41 (0)21 863 54 11
- F +41 (0)21 863 54 31
- I +41 (0)21 863 54 61
- Logitech Representation
- LOGI (U.K.) Ltd.
- LOGITECH Trading S.A.
- Fax +41 (0)21 863 54 02
- Fax +41 (0)21 863 54 02
- LOGITECH Inc.
- LOGITECH Far East Ltd.
- Logitech Australia Computer Peripherals Pty Ltd.
- Sales & Marketing Office
- LOGICOOL Co. Ltd.
- Fax +81 (3) 3543 2911
ii
Copyright
© 1999 Logitech. All Rights Reserved. Logitech, the Logitech logo, and the Logitech products referred to herein are either
the trademarks or the registered trademarks of Logitech. All other trademarks are the property of their respective owners.
Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change
without notice.
Part Number:
622480-0600
Software License Agreement.
LOGITECH IS WILLING TO LICENSE THE ENCLOSED SOFTWARE TO YOU ONLY ON THE CONDITION
THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE AGREEMENT.
This is a legal agreement between you (either
an individual end-user or an entity) and Logitech. By opening the software package, you are agreeing to be bound
by the terms and conditions of the Agreement. If you do not agree to the terms of this Agreement, promptly return
the software package and other items that are part of this product in their original package with your payment
receipt to your point of purchase for a full refund. Grant of License.
Logitech and its suppliers grant you a nonexclusive
license to use one copy of the enclosed software program (“Software”) on one computer only with the Logitech product you have
purchased. No other rights are granted. The Software is in use if it is loaded on the computer’s permanent or temporary memory.
For backup purposes only, you may make one copy of the Software. You must include on the backup copy all copyright and other
notices included on the Software as supplied by Logitech. Installation on a network server for the sole purpose of your internal
distribution of the Software is permitted only if you have purchased an individual Software package for each networked computer
to which the Software is distributed.
Restrictions.
Logitech and its suppliers retain ownership of the Software. You shall not
decompile, disassemble, reverse-engineer, or modify the Software in any way. You may not transmit the Software over a network
(except as expressly permitted above), by telephone, or electronically using any means. You may not transfer the Software except
upon a permanent transfer of the enclosed Logitech product provided that all Software updates are included in the transfer, you do
not retain a copy of the Software, and the transferee agrees to be bound by the terms and conditions in this license. Upon any
violation of any of the provisions of this Agreement, rights to use the Software shall automatically terminate and the Software must
be returned to Logitech or all copies of the Software destroyed.
Limited Product Warranty.
Logitech warrants that any
hardware products accompanying this documentation shall be free from significant defects in material and workmanship for a period
of five years from the date of purchase. Logitech also warrants that the software accompanying this documentation will perform
substantially in accordance with the documentation for a period of 90 days from the date of purchase. Logitech’s hardware
and software warranty is nontransferable and is limited to the original purchaser.
Product Remedies.
Logitech’s entire liability
and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Logitech’s option, either (a) return of the price paid
or (b) repair or replacement of the hardware or software, provided that the hardware or software is returned to the point of purchase,
with a copy of the sales receipt. Any replacement hardware or software will be warranted for the remainder of the original warranty
period or 30 days for the hardware and 30 days for the software, whichever is longer. These remedies are void if failure of
the hardware or software has resulted from accident, abuse, or misapplication.
LIMITATION OF LIABILITY.
THE WARRANTIES SET FORTH IN THIS AGREEMENT REPLACE ALL OTHER WARRANTIES. LOGITECH
EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS WITH RESPECT TO THE DOCUMENTATION,
SOFTWARE, AND HARDWARE. NO LOGITECH DEALER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION,
OR ADDITION TO THIS WARRANTY. IN NO EVENT WILL LOGITECH OR ITS SUPPLIERS BE LIABLE FOR ANY COSTS OF PROCUREMENT
OF SUBSTITUTE PRODUCTS OR SERVICES, LOST PROFITS, LOSS OF INFORMATION OR DATA, OR ANY OTHER SPECIAL, INDIRECT,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING IN ANY WAY OUT OF THE SALE OF, USE OF, OR INABILITY TO USE ANY LOGITECH
PRODUCT OR SERVICE, EVEN IF LOGITECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL LOGITECH’S
LIABILITY EXCEED THE ACTUAL MONEY PAID FOR THE PRODUCTS AT ISSUE. Because some jurisdictions do not allow the limitation
of implied warranties or liability for incidental, consequential, special, or indirect damages, the above limitation may not always apply.
The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability.
U.S. Government Restricted Rights.
The Software is provided to the U.S. Government only with restricted rights and limited
rights. Use, duplication, or disclosure by the U.S. Government is subject to restrictions set forth in 48 C.F.R. 2.101 (October 1995),
consisting of “Commercial Computer Software” and “Commercial Computer Software Documentation” as such terms are used
in 48 C.F.R. 12.212 (September 1995), and in FAR Sections 52-227-14 and 52-227-19 or DFARS Section 52.227-7013 (C) (1) (ii),
or their successors, as applicable. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7204-4 (June 1995), or any
successor regulations, this Software is provided to U.S. Government users pursuant to the terms and conditions herein. Contractor/
Manufacturer is Logitech Inc., 6505 Kaiser Drive, Fremont, CA 94555.
FCC Compliance and Advisory Statement.
This hardware device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference
received, including interference that may cause undesired operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase
the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to
which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications
not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.
Canadian DOC Statement.
This digital device does not exceed the Class B limits for radio noise emissions from digital
apparatus specified in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department
of Communications.
Cet appareil numérique respecte les limites bruits radioélectriques applicables aux appareils numériques de Classe B prescrites
dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le Ministère des Communications.
This device complies with RSS-210 of Industry and Science Canada. Operation is subject to the following two conditions: 1) this device
may not cause interference, and 2) this device must accept any interference, including interference that may cause
undesired operation of the device. Transmitter frequency: 26.995; 27.045; 27.145; 27.195 MHz. Power Output: < 10mV/m @ 3m.