User's Manual

39
Moving your devices around
Moving parts in your RF System
You may need to move some of your devices around in your entertainment system.
First, you need to make sure your Blasters are placed properly for the devices to receive
signals from them. For more help, go to Moving your Blaster and Mini Blasters around.
If you have assigned any of your devices to specific ports in your Blaster, you want to make
sure the correct Blaster is in front of that device in order for it to work properly. For more
information on assigning ports, go to Assigning a device to a specific port on the Blaster.
You may want to change how your devices are set up in your home entertainment
system. In order to make sure your RF system continues to work the way you want, it’s
a good idea to check the following things after you have moved pieces around in your
system:
Check you have placed your Blaster and Mini Blasters correctly. You should have a maxi-
mum ONE Blaster OR Mini Blaster PER SHELF. Each piece should be placed slightly in front
of the devices. One Blaster or Mini Blaster can control side-by-side and stacked devices.
Your Blasters emit a signal to the IR sensor located on your devices. These sensors are
usually located on the front panel.
Moving your Blaster and Mini Blasters around