User's Manual

The L-ZM2102 Z-Wave Module contains the integrated ZW0201 Z-Wave Single Chip, system
crystal and RF front-end circuitry. The ZW0201 Single Chip is an integrated chip containing RF
Transceiver, 8051 MCU core, SRAM, Flash Memory for Z-Wave Protocol and OEM Application
software storage, Triac Controller and a wide range of HW interfaces.
This complete RF solution makes it very easy for OEM customers to RF enable their products
without having to do the time consuming work of designing, verifying and optimizing the RF
design and thereby enables faster time to marked.
Features
APPENDIX A.1 Interfaces
• 10 General Purpose I/O’s
• Two Interrupt Inputs
• Serial UART
• SPI Interface
• Triac Control Interface
• PWM Output
• Four multiplexed 12/8 bit ADC inputs
APPENDIX A.2
APPENDIX A.3 ZW0201 Single Chip
• Optimized 8051 CPU Core
• 32kbyte Flash
• 2kbyte SRAM
• Power-On-Reset / Brown-Out Detection
• Supply Voltage: 2.1V-3.6V
• Power Consumption
o TX@-5dBm = 23mA
o TX@+3dBm = 39mA
o RX = 21mA
o Power down/sleep mode = 2.5µA
APPENDIX A.4 RF
• Freq: 908.42MHz (US) / 868.42MHz (EU)
• High Sensitivity (-101dBm)
• FSK Modulation
• 9.6kbit/s Data Rate
• -20dBm to +3dBm Output power (ZW0201)
• Complies with EN 300 220 and FCC CFR47 part 15