User's Manual

MPQ Test Radio Z
2005-10-03
LOGITECH CONFIDENTIAL
(Printed on 10/3/2005 ) page 14 of 19
Table 5 Absolute Maximum Ratings
2.4.2 DC Characteristics
The following DC characteristics are preliminary for the L-ZM2102 Z-Wave Module.
T
A
= 25¡C, VCC = 3.3V (unless otherwise noted)
Symbol Parameter Condition Min Typ Max Units
VCC
Digital Supply Voltage
2.1 3.3 3.6 V
RRST
2
Reset Pull-up Resistor Integrated in ZW0201 10 MΩ
I
C
Continuous Output Current One GPIO -20 20 mA
I
CTOT
Total continuous output source/sink
current
All GPIO’s -
100
100 mA
I
CC
Transmitting
(16MHz system clock)
-5dBm (transceiver
output)
+3dBm (transceiver
output)
23
39
mA
Receiving
(16MHz system clock)
VCC = 3.3V
21
mA
Power Down
WUT active (POR enabled
1
)
2.5 µA
WUT disabled (POR enabled
1
)
2.5 µA
T
OP
Operating Temperature
-15 85 ¡C
H
OP
Operating Relative Humidity
8 80 %
1. The POR cannot be disabled
2. The integrated Reset pull up is not for external circuitry. An external pull up resistor should be implemented.
Table 6 DC Characteristics
2.5 Physical Specification
Physical Specification Description
Size 12.5mm. x 13.6mm. x 2.4mm (0.492” x 0.535” x 0.094”)
Weight 7g (with shield)