User manual
z From the main Flight Simulator 2004 splash screen, choose the Settings option, this can be found in the bottom left hand corner of the
screen.
z Once in the settings page, first click on the Assignments button, this will take you to the controller assignments screen.
z On the controller assignments screen you will first need to click on the Joystick Axis tab.
z Next click on the drop arrow called Joystick Type next to the box in the upper right of the screen. When the arrow is pressed a drop-down
menu will appear listing all the game controllers connected to your PC. In this list you will see the Saitek Pro Flight Rudder Pedals. Click
on this controller - the menu will now disappear and the Saitek Pro Flight Rudder Pedals will appear as the entry in the joystick type box.
z Next, in the assignment list in the middle of the page, scroll down until you find the entry on the left, that says Left Brake Axis. Next to the
left brake axis there should be an entry that says Left toe, and next to this there should be a box that has a tick in it. If it does not, hover
over the box with your mousepointer and left click - a tick should now appear in the box. You also need to carry out this procedure for the
Right Brake Axis.
z Once this is done click on OK to go back to the main settings screen.
z From the main setting screen click on the sensitivities icon
z From the Controller - Sensitivities page click on the drop arrow next to the box called Joystick Type in the upper right of the screen. When
the arrow is pressed a drop down menu will appear listing all the game controllers connected to your PC. In this list you will see the Saitek
Pro Flight Rudder Pedals.Click on this controller and the menu will now disappear and be replaced by the Saitek Pro Flight Rudder Pedals
z On the screen you will see Simple and Advance radial buttons, Make sure the Simple radial is selected - if not move your mouse over the
radial buttonand left click - a dot will appear in the radial.
z Just under and to the right of the simple radial button, you will see two sliders, one marked Sensitivity - all axes and the other marked Null
zone - all axes. Move the sensitivity slider all the way over to the right and move the null zone slider about 3% down the slider, as in the
picture below. To move theslider, simply left click and hold on it and move to desired setting.
z Once this has been done click OK to go back to the main settings screen. From here you can choose an option from the menu on the right
of the page.
Lock On
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Lock On. For more detailed instructions please
consult your Lock On manual.
z In the Input settings page make sure you have selected the Saitek Pro Flight Rudder Pedals in the devices drop down menu.
z Make sure the Input is set to Axes and not Buttons.
z In the command list make sure that the only axis assigned is the Rotator 2 axis which is assigned to the rudder.
z To change or delete an axis assignment from the control list, click on the control name on the left, then click either clear or change from
the top of the page.
z To test the rudder axis, make sure the test panel icon on the right side of the page is set to on.
z The response curve should look similar to picture below
z The Axis / Slider switch should be set to Axis
Pacific Fighters, IL2 and IL2 Expansion Packs
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Pacific Fighters, IL2 and IL2 Expansion Packs. For
more detailed instructions please consult your manual.
z To get to the controller setup page, at the main menu, click on hardware setup and then click on Input.
z From the Input page you will need to click on HOTAS control.
z Under the HOTAS control section you will need to assign your Saitek Pro Flight Rudder Pedals to your rudder. To do this click in the right
panel alongside the rudder pedals - when a box appears move the Saitek Pro Flight Rudder Pedals (right pedal first) the words "Z-Axis
Rotation ID2" should appear to show the Pro Flight Rudder pedals are selected as in the picture below. Click on apply when this is set
Note - When using the in game test page the Saitek Pro Flight Rudder Pedals will not respond unless they are the only controller plugged in - the
ingame controller test screen only responds to the first controller to be plugged in.
Technical Support
Can't get your controller to work - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are not faulty at all -
they have just not been installed properly. If you experience any difficulty with this product, please first visit our website www.saitek.com
. The
technical support area will provide you with all the information you need to get the most out of your product and should solve any problems you
might have. If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical
Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you
have all the relevant information at hand. To find your local Saitek Technical Support Center , please see the separate Technical Support Center
sheet that came packaged with this product.
Page 4 of 4Untitled Document
03.04.2008file://Z:\WinXP64\manual
_
EN.htm