User Guide

To disable the rudder:
1. Open the HUD software.
2. Go to SETTINGS.
3. Select the Joystick.
4. Click on RUDDER.
5. Click on either “lock” icon in the CURVE PROFILES // presets.
6. Click APPLY.
Controls assigned in Elite Dangerous do not visible differentiate between the X55 Rhino /
X56 H.O.T.A.S. Throttle and the Stick
Unfortunately, there’s no distinct way to tell from in-game — you'll need to note the controls as
you assign them, or use a third party tool such as: https://www.mcdee.net/elite/
The alternative is to use the HUD software for the X-55 and perform all of your button
assignments using it.
Troubleshooting unsigned drivers for Saitek products
Recalibrate the X56 H.O.T.A.S. Axes: Firmware
If you need to re-calibrate the X and Y axes of the stick, you should use the calibrate function in
the HUD software. Go to the Settings, select the stick, and in the bottom of the window, click
Calibrate.
 For all other axes, please follow the X56 RegEdit Calibration instructions
 If the RegEdit fix does not work then follow the instructions below:
NOTE: You must always perform the clear axis calibration step first, before the main calibration
step.
Throttle
Clear axis calibration process for Throttle:
1. Hold down TGL3 down and TGL2 up whilst plugging the throttle in.
2. Then press TGL4 down and TGL3 up.
3. Clear calibration is completed when all lights go out.
4. Unplug/Replug the throttle.
Axis calibration process for Throttle:
1. Move all axes to max and min twice.
2. Press and hold TGL4 down, TGL3 down, TGL2 up together.
3. Calibration is completed when all lights go out.