User's Manual Part 2

18 English
Getting started with

Press the power button on the headset to turn it on •
The headset will wirelessly connect with the wireless base station •
You will see the three LEDs on the wireless base station turn on, blink briey, •
and then one of the LEDs will turn solid

If you have multiple audio devices connected to the wireless base station, •
you can press the INPUT button on the headset to toggle through them
Press the button to change the audio source On the front of the wireless base station, •
the next LED will illuminate, representing the active audio source (If there is only
one audio device connected to the back of the wireless base station, that input will
remain active)
Power button
Input selector
Wireless base station LEDs