User's Manual

Tel: [phone]
Fax: [phone]
2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504
Israel
LogiTag Systems LTD.
www.logi-tag.com
Page
7/11
2.7 System operation:
To operate the system:
1. Connect power supply to the power plug and see that the Power
LED is ON.
2. Connect LAN or RS232 port to the host computer (section 2.3 and
2.4).
3. Run the StockBox software at the host computer
4. Insert transponders to the slot and see that the "Read" LED is ON
5. Monitor on the host computer's screen the identified transponders
6. Insert only one transponder at a time.
7. To perform Re-Stock operation:
a. Open the StockBox lock and remove all the transponders.
b. Press the Re-stock button,
c. Put your badge on the "IDENTIFY" area on the StockBox
and see that the "Read" LED turns ON.
d. Put the cards taken out of the StockBox on the "Identify"
area one after another. Wait 3 seconds between each
transponder. Each time the Read Led should be on.