User's Manual

Lumenis
®
Pulse
TM
50H / 100H Laser Systems Appendix A: EMC Guidance and Manu-
UM-20006520DE, Rev. A Page 73
Appendix A: EMC Guidance
and Manufacturer's Declaration
Electromagnetic Emissions
Guidance and manufacturer’s declaration – electromagnetic emissions
The Lumenis Pulse 50H & 100H systems are intended for use in the electromagnetic environment
specified below. The customer or the user of the Lumenis Pulse 50H & 100H systems should assure that it
is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 1 The Lumenis Pulse 50H & 100H systems use RF
energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A The Lumenis Pulse 50H & 100H systems are suitable
for use in all establishments other than domestic and
those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions IEC
61000-3-2
Not applicable The system consumes more than 16A momentary
current per phase, and therefore is exempt from these
requirements.
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Not applicable The system consumes more than 16A momentary
current per phase, and therefore is exempt from these
requirements.