User manual

- - 30
6.1.10 Advanced
a) No forwarding among wireless clients: When selected,
wireless clients won’t be able to share data with each other.
b) Beacon Interval (ms) : You can define the time interval that
a beacon signal should be sent. The default value is 100.
NOTE: Do not modify this value unless you know what will
be affected.
c) Tx Power : Select a proper output power setting according
to your actual needs.
For example, you may not need 100% of output power if
other wireless clients are not far from you.
d) Idle Time: Select the idle time for the wireless access point.
The default value is 300.
NOTE: Do not modify this value unless you know what will
be affected.