Information

LITHIUM

BAT TERY

SERVICE

–

Page 3

Version 1/2020

ADDITIONAL SUPPLIER INQUIRY

11. Quality management system for manufacturing cells

Does the manufacturer of the cell/battery manufacture the products based on a

documented quality management system according to transport regulations?

YES NO

12. Are the following parameters exceeded?

Lithium ion cell: more than 20 Wh

Lithium metal cell: more than 1 g Lithium

YES NO

Check point 13 – 15 need to be answered when 13 has been ticked “YES“:

13. Does each cell incorporates a safety venting device or is designed

to preclude a violent rupture under normal conditions of carriage?

YES NO

14. Is each cell equipped with an effective means of preventing external short circuits? YES NO

15. Is each battery containing cells or series of cells connected in parallel

equipped with effective means as necessary to prevent dangerous reverse

current ﬂow (e.g. diodes, fuses, etc.)

Not relevant for cells N/A

16. Only in air transport: State of Charge (SoC) for UN 3480 Lithium ion cells and lithium polymer cells

State of Charge (SoC) max. 30 % N/A YES NO

CELLS INSTALLED IN EQUIPMENT

17. Check point 17 needs to be answered when the cells are installed in articles:

17.a) Only button cells enclosed? YES NO

17.b) Number of enclosed cells (other than button cells) per equipment

When the equipment is intentionally active/switched on during transport e.g. data loggers:

17.c) Conﬁrmation that no dangerous amount of heat is emitted from the equipment

N/A YES NO

17.d) Conﬁrmation that the equipment when transported by air fulﬁlls the deﬁned

air transport standards for electromagnetic radiation according to DO-160

N/A YES NO

18. Place, Date 19. Title, Surname, First name 20. Company stamp and signature

LITHIUM CELL TEST SUMMARY AND SUPPLIER INQUIRY

IN ACCORDANCE WITH SUB-SECTION 38.3

OF MANUAL OF TESTS AND CRITERIA

Name/Description of cell (taken from ﬁeld 1)

Schalksmühle, 17.03.2020

Productmanager, Grüter, Marcus