Certifications 2

Safety Data Sheet
MSDS 2.001.003
Page no.: 5 2direct GmbH
Edition: 03.01.2019 Langenstück 5 | 58579 Schalksmühle, Germany
IEC 60086-1
Code of practice for packaging and shipment of primary batteries given in IEC 60086-1:
The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The materials
and pack design shall be chosen so as to prevent the development of unintentional electrical conduction, corrosion of
the terminals and ingress of moisture.
Shock and vibration shall be kept to a minimum. For instance, boxes should not be thrown off trucks, slammed into
position or piled so high as to overload battery containers below. Protection from inclement weather should be
provided.
15. Regulatory information
Marking consideration:
According to DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 6 September 2006 on batteries and accumulators
and waste batteries and accumulators and repealing Directive 91/157/EEC
primary alkaline cylindrical cells/batteries of size LR 6, LR 14, LR 20, and
6 LR 61 have to be marked with the crossed bin on the battery casing, those of
size LR 03 have to be marked with the crossed bin on the packaging.
Water hazard class:
The regulations of the German Federal Water Management Act (WHG) are not
applicable as primary alkaline cylindrical cells/batteries are articles and not
substances, thus there is no risk of water pollution, except the batteries are
violated or dismantled.
16. Other information
Note:
Date of issue of the transport regulations: ADR 2017, RID 2017, IATA 2018
(59th edition), IMDG 2016, DOT / 49 CFR 2018.
Latest covered modification of the European Battery Directive 2006/66/EC:
Directive 2013/56/EU.
Issued by:
2direct GmbH
RoHS:
Available on request
REACH:
Available on request
Issued by:
2direct GmbH
Contact:
http://2direct.de/content/unternehmen/kontakt.htm
Updates:
Current SDS can be downloaded from 2direct.de
(select
Document Type “MATERIAL SAFETY DATA SHEET”).