Material Safety Data Sheet MSDS Report Prepared For : Product Name: Power Bank Model : Nominal Voltage: Typical Capacity: Input: DC 5V Output: DC 5V Weight: 266.0g Dimension : 155.0mm×107.0mm×10.5mm (L×W×T) 12000mAh, 45.6Wh Shenzhen TCT Testing Technology Co., Ltd. Prepared By : 1F, No.1 Building, No.1 Chongqing Road, Yibaolai Industrial Park,Qiaotou Village, Fuyong Town, Baoan District, Shenzhen Report No.: TCT160301M005 Written by: Inspected by: Report No.
Material Safety Data Sheet Material Safety Data Sheet Section 1- Chemical Product & Company Identification Product Name: Power Bank Manufacture: Address: Contact Person: Tel: Fax: Emergency Tel: E-mail: Item Code: TCT160301M005 Section 2- Hazards Identification Preparation hazards and classification Appearance, Color, Odor Primary Route(s) of Exposure Not dangerous with normal use.
Material Safety Data Sheet with contents of an open battery can cause severe irritation or burns to the skin. Eye: Contact between the battery and the eye will not cause any harm. Eye contact with contents of an open battery can cause severe irritation or burns to the eye.
Material Safety Data Sheet Section 4- First Aid Measures Inhalation If contents of an opened battery are inhaled, remove source of contamination or move victim to fresh air. Obtain medical advice. Skin contact If skin contact with contents of an open battery occurs, as quickly as possible remove contaminated clothing, shoes and leather goods. Immediately flush with lukewarm, gently flowing water for at least 30 minutes. If irritation or pain persists, seek medical attention.
Material Safety Data Sheet NFPA Health: 0 Flammability: 0 Instability: 0 Section 6- Accidental Release Measures Personal Precautions, protective equipment, and emergency procedures Restrict access to area until completion of clean-up. Do not touch the spilled material. Wear adequate personal protective equipment as indicated in Section 8. Environmental Precautions Prevent material from contaminating soil and from entering sewers or waterways.
Material Safety Data Sheet Section 8 - Exposure Controls/Personal Protection Engineering Controls Use local exhaust ventilation or other engineering controls to control sources of dust, mist, fumes and vapor. Keep away from heat and open flame. Store in a cool, dry place. Personal Protective Equipment Respiratory Protection: Not necessary under normal conditions.
Material Safety Data Sheet Section 10 – Stability and Reactivity Stability The product is stable under normal conditions. Conditions to Avoid (e.g. static discharge, shock or vibration) Do not subject Polymer Lithium ion Battery to mechanical shock. Vibration encountered during transportation does not cause leakage, fire or explosion. Do not disassemble, crush, short or install with incorrect polarity. Avoid mechanical or electrical abuse.
Material Safety Data Sheet Section 13 – Disposal Considerations Product disposal recommendation Packaging disposal recommendation Observe local, state and federal laws and regulations. Be aware discarded batteries may cause fire, tape the battery terminals to insulate them. Don’t disassembly the battery. Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used. Observe local, state and federal laws and regulations.
Material Safety Data Sheet Transport information: The transportation of primary lithium cells and batteries is regulated by the International Air Transport Association (According to Section II/Section IB of PACKING INSTRUCTION 965 of IATA DGR 57th Edition for transportation), International Civil Aviation Organization, International Maritime Dangerous Goods Code and the US Department of Transportation.
