User manual

- 8 -
Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific
pairing steps may vary with different models of cell phones.
Please refer to your cell phone’s user’s manual for further
information. The general pairing steps are as follows:
1). Keep the receiver and Bluetooth cell phone within 1 meter
when pairing
2). Enter the receiver’s pairing mode (refer to “How to enter
pairing mode”)
3). Active your cell phone’s Bluetooth function and set your cell
phone to search for Bluetooth devices within range. After the
search is completed, select “BT0024” from the list of devices
shown
4). According to the indication, enter password or PIN No:“0000”;
5). If prompted by your cell phone to connect, select “Yes”
6). After successful connecting, blue LED of the receiver will
flash twice every 4 seconds.
Notes:
1. If the pairing is failed, please switch off the receiver and
re-pair according to steps 1～6 mentioned above.
2. After pairing is successful, the receiver and the cell phone
will remember each other, they will no need to re-pair next
time. The receiver can remember 8 paired devices, when
the number of paired devices exceeds 8, the first one will be
replaced.
3. Every time the receiver is switched on, it will connect to the
last connected device automatically. If you want to pair it to
other devices, please turn off the Bluetooth function of
current device first and try to pair the receiver to the new
device according to steps 1～6 mentioned above.
3. Listening to music
When BT0024 is used as a receiver, you can connect it to a 3.5mm