User manual

- 7 -
 RX Mode
Selecting mode: Please turn the TX/RX switch to RX mode
before switching on BT0024.
Note: TX or RX mode cannot be changed after switching on
BT0024.
1. Switching on/off the receiver
Function
Operation
LED indicator
Switching on
receiver
Press button for
3-4 seconds
Blue LED is on for
1second
Switching off
receiver
Press button for
3-4 seconds
Red LED is on for 1
second and then off
2. Pairing with Bluetooth devices
How to enter pairing mode
Function
Operation
Entering
pairing mode
Make sure the receiver is off, press and hold
button for about 5~7 seconds, and do not release it
until red and blue LEDs flashes alternately
Note: The pairing mode wills last 2 minutes. The receiver will
automatically switch to standby mode if no devices can
be connected within 2 minutes.