User manual

- 6 -
3. Reconnecting to a Bluetooth device
1). Automatic connecting
Every time the transmitter is switched on, it will automatically
connect to last connected device.
2). Manual connecting
When the transmitter is in standby mode and doesn’t connect to
any devices, short press button once, it will automatically
connected to last connected device.
3). Can be connected
In addition, when the transmitter is in standby mode and doesn’t
connect to any devices, it can accept the connecting request sent
by the receiver that has paired with the transmitter before.
4). Auto-off
The transmitter will automatically switch off if no devices can be
connected within 5 minutes.
5). Clearing pairing list
Make sure the transmitter is off, press and hold button for
about 10 seconds, and release it until red LED is on for 1 second
and then blue LED is on for 1 second.
6). LED indicator
LED indicator
Status of the transmitter
Blue LED flashes continuously
Pairing mode
Blue LED flashes once every 1
second
Standby mode and not
connected to a device
Blue LED flashes twice every 4
seconds
Connected to a device
Red LED flashes
Low power