User manual

- 5 -
1. Switching on/off the transmitter
Function
Operation
LED indicator
Switching on
transmitter
Press button for
3-4 seconds
Blue LED is on for
1second
Switching off
transmitter
Press button for
3-4 seconds
Red LED is on for 1
second and then off
2. Pairing with a Bluetooth device
After the transmitter connecting to a Bluetooth stereo receiver,
you can enjoy music wirelessly. Before pairing, please make sure
your Bluetooth stereo receiver supports Bluetooth A2DP profile.
The pairing steps are as follows:
1). Make sure the transmitter is off, otherwise switch it off;
2). Keep the transmitter and your Bluetooth stereo receiver
within meter
3). Switch on your Bluetooth stereo receiver and make it enter
pairing mode
4). Press and hold MFB button of the transmitter for 5～7
seconds and do not release it until red and blue LEDs flash
alternately, at this time, the transmitter entered pairing mode;
5). The transmitter will automatically search for Bluetooth stereo
receiver and finish connection
6). After successful connecting, blue
LED of the transmitter flashes
twice every 4 seconds
7). Connect the transmitter to your
music player through 3.5mm
audio jack to play music.
Note:
The pairing mode will last 2 minutes. The transmitter will enter
standby mode if no devices can be connected within 2 minutes.
The transmitter can pair with a Bluetooth stereo receiver
whose PIN NO... is “0000”, “1234”or “1111”, “8888”.